Drain valve set
for dual flush technology, flush actuation from front or top, concealed cistern 3H, concealed cistern 3L
Year built (from): | 14.05.0220. |
The information in this instruction manual is directed at the following groups of people:
Heating and plumbing experts and trained personnel
Individuals without the abovementioned training or qualification are not permitted to mount, install and, if required, maintain this product. This restriction does not extend to possible operating instructions.
The installation of Viega products must take place in accordance with the general rules of engineering and the Viega instructions for use.
Warning and advisory texts are set aside from the remainder of the text and are labelled with the relevant pictographs.
This symbol warns of possible life-threatening injury.
This symbol warns of possible serious injury.
This symbol warns of possible injury.
This symbol warns of possible damage to property.
This symbol gives additional information and hints.
This instruction for use contains important information about the choice of product or system, assembly and commissioning as well as intended use and, if required, maintenance measures. The information about the products, their properties and application technology are based on the current standards in Europe (e.g. EN) and/or in Germany (e.g. DIN/DVGW).
Some passages in the text may refer to technical codes in Europe/Germany. These should serve as recommendations in the absence of corresponding national regulations. The relevant national laws, standards, regulations, directives and other technical provisions take priority over the German/European directives specified in this manual: The information herein is not binding for other countries and regions; as said above, they should be understood as a recommendation.
The drain valve set is suitable for the concealed cisterns 3H and 3L.
Requirements:
The cistern is freely accessible.
The water supply has been shut off.
The ceramic has been mounted.
Fold the tabs forward.
Lift the drain valve.
Remove the drain valve through the inspection opening and dispose of it.
Remove the drain valve holder through the inspection opening and dispose of it.
Set the large flush volume at the drain valve.
Set the small flush volume at the drain valve.
Unlock the flushing throttle.
Set the flush flow at the throttle.
Lock the flushing throttle.
Insert the drain valve holder through the inspection opening into the cistern.
Insert the drain valve through the inspection opening into the cistern.
Position the drain valve.
Fold the tabs upwards.
Re-open the corner valve.
Insert the site protection panel into the cistern.
Turn the site protection panel's lock by 90° clockwise.
Separate the product and packaging materials (e. g. paper, metal, plastic or non-ferrous metals) and dispose of in accordance with valid national legal requirements.